#1 |
ISTA 4.29.15 / SQLiteDBs (OTHER,en,de,zh,ru,it) 4.29.14 / BLP 4.29.11 / SDP 4.29.11
Description: ISTA + (Rheingold ISTA-D): BMW Dealer Diagnostic Software * Rejection of fake FSC can be disabled in ISTAGUI.exe.config, active by default. * permission can be changed in ISTAGUI.exe.config file * you can disable CheckSystemRequirements in ISTAGUI.exe.config * enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk). * You can now enable diagnostics for J29 (Toyota Supra) in ISTAGUI.exe.config. * "Unknown terminal voltage!" the message with ENET is corrected, now ISTA does check the voltage, but does not display it. * reading FASTA data from vehicle is disabled in ISTAGUI.exe.config * if you are using my Regfiles, open it with Notepad and change InstallLocation to the correct location on her PC. (not required with installer) + Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0) - SP-Daten v68.0.800 + PSdZData Lite -4.24.31 -4.25.40 -4.26.35 -4.27.31 -4.28.41 -4.29.11 + Tools
Description: ISTA + (Rheingold ISTA-D): BMW Dealer Diagnostic Software * Rejection of fake FSC can be disabled in ISTAGUI.exe.config, active by default. * permission can be changed in ISTAGUI.exe.config file * you can disable CheckSystemRequirements in ISTAGUI.exe.config * enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk). * You can now enable diagnostics for J29 (Toyota Supra) in ISTAGUI.exe.config. * "Unknown terminal voltage!" the message with ENET is corrected, now ISTA does check the voltage, but does not display it. * reading FASTA data from vehicle is disabled in ISTAGUI.exe.config * if you are using my Regfiles, open it with Notepad and change InstallLocation to the correct location on her PC. (not required with installer) + Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0) - SP-Daten v68.0.800 + PSdZData Lite -4.24.31 -4.25.40 -4.26.35 -4.27.31 -4.28.41 -4.29.11 + Tools