VAG ETKA 8.1 (1511) + 8.2 (1487) + 8.3 - Torrent (without pass)

[aleksey-ms]

VAG ETKA 8.1 (1511)  + 8.2 (1487) + 8.3 - Torrent (without pass)

The ETKA electronic catalog contains complete information on spare parts and accessories for VAG vehicles (VW, Seat, Skoda, AUDI), including minibusses.

Works on Windows x32 and x64.
Patch and instruction inside.

[aleksey-ms]

Added new version VAG ETKA 8.1 (1432) 01.2022

[aleksey-ms]

Added VAG ETKA 8.2 (1474)

[trb.ro]

Added VAG ETKA 8.2 (1474)

Hello Aleksey, 

 I have a hiccup with the installation. After everything is installed correctly by using the instructions .txt,  when i run Ekta, i get myself this message:

information über den vorhandenen Hardlock 
Version der DLL 2.12 
Beim Ansprechen des Hardlocks trat der Fehler 7 auf

Translation by the holy google: 

information about the existing hardlock
version of the DLL 2.12 
Error 7 occurred when addressing the hardlock

============
Tried the following steps to address the issue: 
- performed an uninstallation of Ekta, with registry cleanup to ensure a clean entry of the reg files. (HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, HKEY_LOCAL_MACHINE entries were deleted accordingly, and checking USERS & CURRENT_CONFIG revealed no extra reg entries)
- doublechecked for any residual files/folders
- reinstalled with the same error afterwards. 

Tested on Win7 x64 hardcase laptop used primarily for auto diagnose for VAG cars (VCDS however is not yet present as it is a fresh OS install and i wanted to start off with EKTA before VCDS).

Please advise if you happen to know a way around this. I am sorely tempted to nuke and reinstall the OS but i'd love to avoid that  

Cheers from Bucharest!

[aleksey-ms]

Added VAG ETKA 8.2 (1474)

Hello Aleksey, 

 I have a hiccup with the installation. After everything is installed correctly by using the instructions .txt,  when i run Ekta, i get myself this message:

information über den vorhandenen Hardlock 
Version der DLL 2.12 
Beim Ansprechen des Hardlocks trat der Fehler 7 auf

Translation by the holy google: 

information about the existing hardlock
version of the DLL 2.12 
Error 7 occurred when addressing the hardlock

============
Tried the following steps to address the issue: 
- performed an uninstallation of Ekta, with registry cleanup to ensure a clean entry of the reg files. (HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, HKEY_LOCAL_MACHINE entries were deleted accordingly, and checking USERS & CURRENT_CONFIG revealed no extra reg entries)
- doublechecked for any residual files/folders
- reinstalled with the same error afterwards. 

Tested on Win7 x64 hardcase laptop used primarily for auto diagnose for VAG cars (VCDS however is not yet present as it is a fresh OS install and i wanted to start off with EKTA before VCDS).

Please advise if you happen to know a way around this. I am sorely tempted to nuke and reinstall the OS but i'd love to avoid that  

Cheers from Bucharest!

Hello. There may be too many reasons for this error. If you need help installing, send me a PM.

[aleksey-ms]

Added VAG ETKA 8.1 (1485) + 8.2 (1487)

[aleksey-ms]

Added VAG ETKA 8.1 (1511)