We sell HQ Autocom single board VCI nearly 1:1 to original.
Only we are reworking a secret component which is not known in the public. it is neccesary for truck diagnostic!
It is not shown on our pictures and we dont answer question about this component..
We are reworking the PCBs in Germany with HQ components from Mouser or Farnell.
All PCBs are tested before shipping. We are testing on breakout box & real cars/trucks with Software 2020.23 Firmware 3201.
Our PCBs are working with all cars including BMW & Volvo and any kind of Trucks we tested till now.
We sell this PCB in red Multidiag Pro case
****In stock****
All our boards are comming with following components:
1.
Bluetooth Modul
2.
TJA1050T, TJA1057T or ATA6561 High-speed CAN transceiver
3.
EPCOS CAN Filter
4.
4.5V or 5V Relays
5.
FTDI Chip FT232RQ
6.
SN74F08D Logic Gates
7.
LM2575S 1A STEP-DOWN VOLATGE REGULATOR
8.
PANASONIC, SUNCON or United Chemi-Con HQ Low ESR Electrolytic Capacitors
9.
GEZ SMCJ24V0©A Transient Voltage Suppressor (24.0 V)
10.
STM32F205ZCT6 Microcontroller
11.
SI9241AEY Single-Ended Bus Transceiver
12.
74HCT04D Hex Inverter
13.
Secret component
What we always rework:
3.
We always change the China 701 to original EPCOS CAN Filter
8.
We always change the cheap China Capacitors (lifespan 500-1000h) to HQ PANASONIC, SUNCON or United Chemi-Con Low ESR Electrolytic Capacitors (lifespan 2000h+)
Cause of chip crisis in China the components of PCBs are changing from batch to batch. We replace them if needed to HQ components.
We never trust the printing on any components from China, we always check the quality!
13.
For full compatibility with trucks we are adding a secret component to our boards.
You dont believe it? If you have problems with your Autocom to read trucks then try ours 

What we rework if needed:
2.
Original is TJA1050T but TJA1057T & ATA6561 is upgrade of TJA1050T (next generation). Depends on our stock we use TJA1050T, TJA1057T or ATA6561.
4.
We always measure resistance. If resistance is below 140 Ohms we replace the relay.
Relays should have 4.5V ~ 150 Ohms & 5V ~ 190 Ohms.. Never trust the printing on China Relays always measure!!!
6.
If we see China variants of this we change it to original SN74F08D
9.
Some PCB come with GEX suppressor. Then we change it to GEZ SMCJ24V0©A
11.
Normaly China PCB is comming with original. But if not we change it to SI9241AEY
Price:
1pcs 129€
5pcs 124€
10pcs 119€
25pcs 114€
50pcs 109€
50+ please contact pm
DHL/UPS/FEDEX shipping from Germany
Im new here in Automotiveforum but im a MHHAUTO member since 10 years. I have same username so please feel free to check my reputation there!
Payment via Bitcoin, Monero, Bitnovo(+3%), Paypal regular (+5%), Paypal as friend or cash by delivery (only if possible in your country)
We are also accepting cash via carrier pigeon 

Shipping price to EU:
DHL parcel M (insurance up to 50 euros + tracking) 11.39€
DHL package up to 2kg 13.99€
DHL package up to 2kg 13.99€
If you want to buy please contact via PM
If you already bought our PCB please leave review here!
****In stock****


![[Image: IMG-20211229-140148.jpg]](https://i.ibb.co/sWv9NCs/IMG-20211229-140148.jpg)
![[Image: front.jpg]](https://i.ibb.co/qJfjzhP/front.jpg)
![[Image: bsh.jpg]](https://i.ibb.co/DM0gFJt/bsh.jpg)
![[Image: bsh.jpg]](https://i.ibb.co/Xjf7DJC/bsh.jpg)
![[Image: all.jpg]](https://i.ibb.co/cg1yv2d/all.jpg)