Welcome Guest, Not a member yet ?


Latest news: ---- request SQLiteDBs (Spanish - ES) BMW ---- BMW FSC Validator TOOL ---- BMW ISTA 4.60.3x I-LEVEL OVERVIEW ---- GM PCM Programming GM Tech2 + TIS2000 FULL ---- BMW MGD1 FSC GENERATOR FULL ---- BMW ISTA 4.60.30 Standalone Full ---- Chrysler J2534 V16.01-16 Install Files Full ---- VCDS 25.6.0 Installer + Loader 08.025.12 FULL ---- BMW ISTA-P Loaders Files FULL ---- WABCO TEBS-E 7.20 FILES MEGA ---- PACCAR ESA 5.7 SW Flash Files MEGA ---- BMW MG1 FSC SOLUTION TOOL ---- BMW ISTA+ 4.60.3x Files MEGA ---- CAS3 + CAS4 V1.2 FULL ---- Xentry Activator 4.9.7 Full Latest ---- Mercedes DTPID 26.7.4 Daimler Trucks Files ---- Renault Can Clip 249 ISO Files Mega ---- Porsche PIWIS4 42.950 PIWIS3 38.250 PIWIS2 18.100 Full ---- SW Finder 6.0.7 Files FULL ---- Daf Euro 6 Manuals ---- VOLVO_VERSION4_DTC_LIST ---- tebse 7.20 ---- Nissan Consult-3+ Full Crack for J2534 and automatic fix ---- Toyota Techstream 18 + FULL KEYEGEN + VIDEO INSTRUCTION ---- hi ---- Op-Com 160115a 1990 - 2016 Full ---- BMW MDG1 FSC GENERATOR FULL ---- WABCO TEBS-E Generic Schematic Diagrams ---- Hi ---- Introduction ----

SELLING 1:1 AUTOCOM SINGLE PCB REWORKED IN GERMANY WORKS ON ALL CARS TRUCKS 2020.23

hanstanz Offline
Junior Member
#1
We sell HQ Autocom single board VCI nearly 1:1 to original.

Only we are reworking a secret component which is not known in the public. it is neccesary for truck diagnostic!
It is not shown on our pictures and we dont answer question about this component..

We are reworking the PCBs in Germany with HQ components from Mouser or Farnell. 
All PCBs are tested before shipping. We are testing on breakout box & real cars/trucks with Software 2020.23 Firmware 3201.
Our PCBs are working with all cars including BMW & Volvo and any kind of Trucks we tested till now.
We sell this PCB in red Multidiag Pro case
****In stock****

[Image: IMG-20211229-140148.jpg]
[Image: front.jpg]
[Image: bsh.jpg]
[Image: bsh.jpg]
[Image: all.jpg]

All our boards are comming with following components:

1.
Bluetooth Modul
2.
TJA1050T, TJA1057T or ATA6561 High-speed CAN transceiver
3.
EPCOS CAN Filter
4.
4.5V or 5V Relays
5.
FTDI Chip FT232RQ
6.
SN74F08D Logic Gates
7.
LM2575S 1A STEP-DOWN VOLATGE REGULATOR
8.
PANASONIC, SUNCON or United Chemi-Con HQ Low ESR Electrolytic Capacitors
9.
GEZ SMCJ24V0©A Transient Voltage Suppressor (24.0 V)
10.
STM32F205ZCT6 Microcontroller
11.
SI9241AEY Single-Ended Bus Transceiver
12.
74HCT04D Hex Inverter
13.
Secret component

What we always rework:

3.
We always change the China 701 to original EPCOS CAN Filter
8.
We always change the cheap China Capacitors (lifespan 500-1000h) to HQ PANASONIC, SUNCON or United Chemi-Con Low ESR Electrolytic Capacitors (lifespan 2000h+)
Cause of chip crisis in China the components of PCBs are changing from batch to batch. We replace them if needed to HQ components.
We never trust the printing on any components from China, we always check the quality!
13.
For full compatibility with trucks we are adding a secret component to our boards.
You dont believe it? If you have problems with your Autocom to read trucks then try ours Wink

What we rework if needed:

2.
Original is TJA1050T but TJA1057T & ATA6561 is upgrade of TJA1050T (next generation). Depends on our stock we use TJA1050T, TJA1057T or ATA6561.
4.
We always measure resistance. If resistance is below 140 Ohms we replace the relay.
Relays should have 4.5V ~ 150 Ohms & 5V ~ 190 Ohms.. Never trust the printing on China Relays always measure!!!
6.
If we see China variants of this we change it to original SN74F08D
9.
Some PCB come with GEX suppressor. Then we change it to GEZ SMCJ24V0©A
11.
Normaly China PCB is comming with original. But if not we change it to SI9241AEY

Price:

1pcs 129€
5pcs 124€
10pcs 119€
25pcs 114€
50pcs 109€
50+ please contact pm
DHL/UPS/FEDEX shipping from Germany
Im new here in Automotiveforum but im a MHHAUTO member since 10 years. I have same username so please feel free to check my reputation there!

Payment via Bitcoin, Monero, Bitnovo(+3%), Paypal regular (+5%), Paypal as friend or cash by delivery (only if possible in your country)
We are also accepting cash via carrier pigeon Wink

Shipping price to EU:
DHL parcel M (insurance up to 50 euros + tracking) 11.39€
DHL package up to 2kg 13.99€

If you want to buy please contact via PM
If you already bought our PCB please leave review here!

****In stock****
Reply
Thanks given by: Speyer , dede2441 , dede2441 , Mlock , HSP2602 , HSP2602

nemesis3290 Offline
Junior Member
#2
(12-31-2021, 12:37 AM)hanstanz Wrote:
We sell HQ Autocom single board VCI nearly 1:1 to original.

Only we are reworking a secret component which is not known in the public. it is neccesary for truck diagnostic!
It is not shown on our pictures and we dont answer question about this component..

We are reworking the PCBs in Germany with HQ components from Mouser or Farnell. 
All PCBs are tested before shipping. We are testing on breakout box & real cars/trucks with Software 2020.23 Firmware 3201.
Our PCBs are working with all cars including BMW & Volvo and any kind of Trucks we tested till now.
We sell this PCB in red Multidiag Pro case
****In stock****

[Image: IMG-20211229-140148.jpg]
[Image: front.jpg]
[Image: bsh.jpg]
[Image: bsh.jpg]
[Image: all.jpg]

All our boards are comming with following components:

1.
Bluetooth Modul
2.
TJA1050T, TJA1057T or ATA6561 High-speed CAN transceiver
3.
EPCOS CAN Filter
4.
4.5V or 5V Relays
5.
FTDI Chip FT232RQ
6.
SN74F08D Logic Gates
7.
LM2575S 1A STEP-DOWN VOLATGE REGULATOR
8.
PANASONIC, SUNCON or United Chemi-Con HQ Low ESR Electrolytic Capacitors
9.
GEZ SMCJ24V0©A Transient Voltage Suppressor (24.0 V)
10.
STM32F205ZCT6 Microcontroller
11.
SI9241AEY Single-Ended Bus Transceiver
12.
74HCT04D Hex Inverter
13.
Secret component

What we always rework:

3.
We always change the China 701 to original EPCOS CAN Filter
8.
We always change the cheap China Capacitors (lifespan 500-1000h) to HQ PANASONIC, SUNCON or United Chemi-Con Low ESR Electrolytic Capacitors (lifespan 2000h+)
Cause of chip crisis in China the components of PCBs are changing from batch to batch. We replace them if needed to HQ components.
We never trust the printing on any components from China, we always check the quality!
13.
For full compatibility with trucks we are adding a secret component to our boards.
You dont believe it? If you have problems with your Autocom to read trucks then try ours Wink

What we rework if needed:

2.
Original is TJA1050T but TJA1057T & ATA6561 is upgrade of TJA1050T (next generation). Depends on our stock we use TJA1050T, TJA1057T or ATA6561.
4.
We always measure resistance. If resistance is below 140 Ohms we replace the relay.
Relays should have 4.5V ~ 150 Ohms & 5V ~ 190 Ohms.. Never trust the printing on China Relays always measure!!!
6.
If we see China variants of this we change it to original SN74F08D
9.
Some PCB come with GEX suppressor. Then we change it to GEZ SMCJ24V0©A
11.
Normaly China PCB is comming with original. But if not we change it to SI9241AEY

Price:

1pcs 129€
5pcs 124€
10pcs 119€
25pcs 114€
50pcs 109€
50+ please contact pm
DHL/UPS/FEDEX shipping from Germany
Im new here in Automotiveforum but im a MHHAUTO member since 10 years. I have same username so please feel free to check my reputation there!

Payment via Bitcoin, Monero, Bitnovo(+3%), Paypal regular (+5%), Paypal as friend or cash by delivery (only if possible in your country)
We are also accepting cash via carrier pigeon Wink

Shipping price to EU:
DHL parcel M (insurance up to 50 euros + tracking) 11.39€
DHL package up to 2kg 13.99€

If you want to buy please contact via PM
If you already bought our PCB please leave review here!

****In stock****

hello 
I also find you here in this forum I am perhaps one of the first who bought the interface
 from you and I must say that it works I paid a little more better for the next buyers they
 buy at a slightly lower price I'm happy with find you here fast shipping .... ADVICE ....... 
a question when I bought the interface the 3201 firmware was not yet present
but only the 3200 can I also use the 3201 firmware?
thank you
Greetings
Reply
Thanks given by:

hanstanz Offline
Junior Member
#3
Hello and happy new year!

Yes for sure you should use 3201 or any newer Firmware. As long as Autocom dont change their VCI, you can use the newest Firmware with my boards.
For Software 2020.23 i would recommend 3201 Firmware.

Best regards
Hans
Reply
Thanks given by:

Speyer Offline
Junior Member
#4
(12-31-2021, 12:37 AM)hanstanz Wrote:
Wir verkaufen HQ Autocom Single Board VCI fast 1:1 zum Original.

Nur wir überarbeiten eine geheime Komponente, die in der Öffentlichkeit nicht bekannt ist. Es ist für die LKW-Diagnose erforderlich!
Es ist nicht auf unseren Bildern zu sehen und wir beantworten keine Fragen zu diesem Bauteil.

Wir überarbeiten die Leiterplatten in Deutschland mit HQ-Komponenten von Mouser oder Farnell. 
Alle Leiterplatten werden vor dem Versand getestet. Wir testen an Breakout-Boxen und echten Autos/LKWs mit Software 2020.23 Firmware 3201.
Unsere Leiterplatten funktionieren mit allen Autos, einschließlich BMW und Volvo , und allen Arten von Lastwagen, die wir bisher getestet haben.
Wir verkaufen diese Platine im roten Multidiag Pro Gehäuse
****Auf Lager****

[Image: IMG-20211229-140148.jpg]
[Image: front.jpg]
[Image: bsh.jpg]
[Image: bsh.jpg]
[Image: all.jpg]

Alle unsere Boards werden mit folgenden Komponenten geliefert:

1.
Bluetooth-Modul
2.
TJA1050T, TJA1057T oder ATA6561 Hochgeschwindigkeits-CAN-Transceiver
3.
EPCOS CAN-Filter
4.
4,5-V- oder 5-V-Relais
5.
FTDI-Chip FT232RQ
6.
SN74F08D Logikgatter
7.
LM2575S 1A STEP-DOWN SPANNUNGSREGLER
8.
PANASONIC, SUNCON oder United Chemi-Con HQ Elektrolytkondensatoren mit niedrigem ESR
9.
GEZ SMCJ24V0©A Überspannungsschutz (24,0 V)
10.
STM32F205ZCT6 Mikrocontroller
11.
SI9241AEY Einseitiger Bus-Transceiver
12.
74HCT04D Hex-Wechselrichter
13.
Geheime Komponente

Was wir immer wieder nacharbeiten:

3.
Wir tauschen den China 701 immer gegen Original EPCOS CAN Filter
8.
Wir tauschen die günstigen China-Kondensatoren (Lebensdauer 500-1000h) immer gegen HQ PANASONIC, SUNCON oder United Chemi-Con Low ESR Elektrolytkondensatoren (Lebensdauer 2000h+)
Aufgrund der Chipkrise in China ändern sich die Komponenten von Leiterplatten von Charge zu Charge. Wir tauschen sie bei Bedarf gegen HQ-Komponenten aus.
Wir vertrauen niemals dem Druck auf irgendwelche Komponenten aus China, wir prüfen immer die Qualität!
13.
For full compatibility with trucks we are adding a secret component to our boards.
You dont believe it? If you have problems with your Autocom to read trucks then try ours Wink

What we rework if needed:

2.
Original is TJA1050T but TJA1057T & ATA6561 is upgrade of TJA1050T (next generation). Depends on our stock we use TJA1050T, TJA1057T or ATA6561.
4.
We always measure resistance. If resistance is below 140 Ohms we replace the relay.
Relays should have 4.5V ~ 150 Ohms & 5V ~ 190 Ohms.. Never trust the printing on China Relays always measure!!!
6.
If we see China variants of this we change it to original SN74F08D
9.
Some PCB come with GEX suppressor. Then we change it to GEZ SMCJ24V0©A
11.
Normaly China PCB is comming with original. But if not we change it to SI9241AEY

Price:

1pcs 129€
5pcs 124€
10pcs 119€
25pcs 114€
50pcs 109€
50+ please contact pm
DHL/UPS/FEDEX shipping from Germany
Im new here in Automotiveforum but im a MHHAUTO member since 10 years. I have same username so please feel free to check my reputation there!

Payment via Bitcoin, Monero, Bitnovo(+3%), Paypal regular (+5%), Paypal as friend or cash by delivery (only if possible in your country)
We are also accepting cash via carrier pigeon Wink

Shipping price to EU:
DHL parcel M (insurance up to 50 euros + tracking) 11.39€
DHL package up to 2kg 13.99€

If you want to buy please contact via PM
If you already bought our PCB please leave review here!

****In stock****

Habe interesse an zwei interface. Bitte Information für Bestellung. Danke
Reply
Thanks given by:





Users browsing this thread:
1 Guest(s)




Forum software by © MyBB .