| #14 |
Added
VAG iDEX neo 2.x.x. (installation, projects, 1 year license) and 1 or 5 year licenses
iDEX neo 2.2.3.0 updates:
General: Updated to iDEX essentials v176.5.2.
General: Fixed an error that occurred sporadically when exiting iDEX.
BUS trace: Fixed an error that occurred when tracing large amounts of data.
RPC+: Automated detection of required workarounds for certain interface versions.
RPC+: Polling timeout during SOD connection setup increased.
RPC+: The Reverse Socks Proxy is now waited for a specific time.
RPC+: Security mode query implemented.
RPC+: Optimization of assembly status query.
RPC+ TestClient: Disconnection to the VCI no longer triggers an exception.
Send Hex Module: Communication to control units is now terminated correctly.
Send Hex Module: Recording of the script functions now works correctly.
VCI selection: The PDU API used by ODIS is no longer added automatically.
VCI selection: In ""Other VCIs"" it is now possible to directly select a protocol type (CAN, CANFD, DOIP).
Actuator: Instead of the measured values, the selectable actuators are now directly displayed again.
Coding: If a control unit can no longer be reached after the reset, the module is now correctly discharged.
Encoding: Fixed an error that occurred when communicating directly with a DK2F in the encoding module.
P-Mode: Optimization of login/SFD queries.
Adaptation: Optimization of the process at KWP.
Basic setting: The results of the routine status are now also displayed.
Identification: Versions of the logical software blocks are now always read and transferred to the log.
VAG iDEX neo 2.x.x. (installation, projects, 1 year license) and 1 or 5 year licenses
iDEX neo 2.2.3.0 updates:
General: Updated to iDEX essentials v176.5.2.
General: Fixed an error that occurred sporadically when exiting iDEX.
BUS trace: Fixed an error that occurred when tracing large amounts of data.
RPC+: Automated detection of required workarounds for certain interface versions.
RPC+: Polling timeout during SOD connection setup increased.
RPC+: The Reverse Socks Proxy is now waited for a specific time.
RPC+: Security mode query implemented.
RPC+: Optimization of assembly status query.
RPC+ TestClient: Disconnection to the VCI no longer triggers an exception.
Send Hex Module: Communication to control units is now terminated correctly.
Send Hex Module: Recording of the script functions now works correctly.
VCI selection: The PDU API used by ODIS is no longer added automatically.
VCI selection: In ""Other VCIs"" it is now possible to directly select a protocol type (CAN, CANFD, DOIP).
Actuator: Instead of the measured values, the selectable actuators are now directly displayed again.
Coding: If a control unit can no longer be reached after the reset, the module is now correctly discharged.
Encoding: Fixed an error that occurred when communicating directly with a DK2F in the encoding module.
P-Mode: Optimization of login/SFD queries.
Adaptation: Optimization of the process at KWP.
Basic setting: The results of the routine status are now also displayed.
Identification: Versions of the logical software blocks are now always read and transferred to the log.