On July 17th, Cummins released August Incal on their download site. For those still using Insite 7.6, I have converted & uploaded all 5 disc's into one download (CalibrationWorkspace) to Mega.nz.
Caution, the folder is massive at 39.86gb and will expire on January 28th 2021 as will the original download from Cummins.
Press 'Download' for the Link (No password required) N.B. This is for Insite 7 Only.
It has been tested on a ISC & ISB CM2150 engines using an Inline 6, it re-calibrated both ECMs without any problems.
To get the best diagnostic testing and full engine coverage, I would recommend using Insite 8.5.2 or later and using calibrations downloaded direct from Cummins.
Caution, the folder is massive at 39.86gb and will expire on January 28th 2021 as will the original download from Cummins.
Press 'Download' for the Link (No password required) N.B. This is for Insite 7 Only.
It has been tested on a ISC & ISB CM2150 engines using an Inline 6, it re-calibrated both ECMs without any problems.
To get the best diagnostic testing and full engine coverage, I would recommend using Insite 8.5.2 or later and using calibrations downloaded direct from Cummins.