| #1 |
(This post was last modified: 02-13-2024, 02:21 PM by Raheem1983.)
hi mates, i realy need help on vw touareg. the car came starting and running to workshop just for service. but it happens that theres one more vw touareg that i was battling to start it for a bit with immobiliser active on dash.
made a dumb decision on try and test the kessy of the non working car to the working car. no ignition came.
the problem is, when i did put back the original kessy from the working car the same happened. no ignition too. only stays on dash LEARNING
so what i did is to read the file from original kessy of the working car with Orange to see if anything went wrong and the eeprom file 93c86 got corrupted some how. and can no longer recognize nor chassi and immo keys with tango. and also autel im508 with programmer does not recognise anything. my guess is the file got corrupted
can someone please help me fix this problem
AND THE CORRUPTED FILE PLEASE. thanks
original car chassi is
WVGZZZ7LZ4D057355
KESSY part No. 3D0909135P
AND ALSO TO GET LOGIN PIN AND CS
made a dumb decision on try and test the kessy of the non working car to the working car. no ignition came.
the problem is, when i did put back the original kessy from the working car the same happened. no ignition too. only stays on dash LEARNING
so what i did is to read the file from original kessy of the working car with Orange to see if anything went wrong and the eeprom file 93c86 got corrupted some how. and can no longer recognize nor chassi and immo keys with tango. and also autel im508 with programmer does not recognise anything. my guess is the file got corrupted
can someone please help me fix this problem
AND THE CORRUPTED FILE PLEASE. thanks
original car chassi is
WVGZZZ7LZ4D057355
KESSY part No. 3D0909135P
AND ALSO TO GET LOGIN PIN AND CS
